Please note: this questionnaire has not yet been checked by a professional. Treat the outcome as an example only.
Laying laminate flooring
- Difficulty:
- Easy
- Duration:
- 1 to 2 days, after 48 hours of acclimatising
- Questions:
- 15
- 3D configurator:
- you see your job in 3D with every question
- Step-by-step plan:
- 18 steps

Laying laminate is one of the easiest jobs, as long as the preparation is right. The substrate has to be dry and flat, screed and tiles need a vapour-control film, and the laminate must be able to expand by 8 to 10 mm everywhere.
We ask about your room and your substrate and work everything out: laminate with cutting loss, film, underlay, skirting, profiles for the doorways and all the tools. Then you get a step-by-step plan that fits your floor, from acclimatising to the skirting. With damp, a floor that is too uneven or suspected asbestos in old vinyl, we tell you what has to happen first.
Often combined with
Jobs that usually come just before or after this one.
3D configuratorLaying vinyl flooringClick vinyl or glue-down vinyl, in planks or tiles, in a dry room or a bathroom, on a substrate that you first make flat and smooth.Moderate20 questions1 to 3 days, after 48 hours of acclimatisingView this job
3D configuratorLaying parquet flooringEngineered parquet, floating on an underlay or glued to the screed, with oiling or lacquering when the boards are unfinished.Moderate18 questions2 to 3 days, after 48 hours of acclimatisingView this job
3D configuratorLaying a screedA traditional cement screed, bonded, on film or floating on insulation: edge strip, mesh, rails, mixing, laying and drying.Demanding19 questions1 to 2 days of work, plus at least 4 weeks of dryingView this job
3D configuratorLaying underfloor heatingWater underfloor heating in a new screed: edge strip, stud panels or tacker system, the pipes in a snail pattern, the manifold and the pressure test.Demanding18 questions1 to 2 days of laying, 24 hours of pressure testing; then the screed and at least 28 days of waitingView this job
3D configuratorFitting an interior doorA new door set in an existing opening, a new leaf in the old frame, or trimming a door after a new floor.Moderate17 questionsHalf a day to a day per doorView this job