Please note: this questionnaire has not yet been checked by a professional. Treat the outcome as an example only.
Fitting a wall-hung toilet
- Difficulty:
- Moderate
- Duration:
- 1 to 2 days of work, plus the time for finishing the wall
- Questions:
- 21
- 3D configurator:
- you see your job in 3D with every question
- Step-by-step plan:
- 17 steps

A wall-hung toilet does not hang on the wall but on a steel frame that stands on the floor and disappears behind a pre-wall. In that frame are the cistern, the drain bend and the threaded rods for the bowl. Everything you do behind the wall has to be right first time: the height, the drain and the water connection.
We ask about your room, your drain and your water pipe and put your list together: frame, bowl, flush plate, the right fittings, boards, battens and all the tools. Then you get a step-by-step plan from shutting off the water to the silicone joint. If the drain is too far from the wall, there is asbestos in the pipe or the water pipe is too old, we tell you what has to happen first. Tiling and a new drain line are separate jobs.
Often combined with
Jobs that usually come just before or after this one.
3D configuratorTiling a bathroom wallWall tiles on plasterboard, plaster or existing tiles, with the right primer and waterproofing in the wet zone.Moderate15 questions2 to 4 days, plus drying timeView this job
3D configuratorLaying drain pipesNew PVC or PP drain pipes from your appliances to the stack, with the right diameters, the right fall and a test with water.Moderate14 questions1 to 3 daysView this job
3D configuratorLaying water supply pipesNew hot and cold water pipes in multilayer pipe, from a manifold to every tap point, with pressure test and flushing.Demanding18 questions2 to 4 days, plus drying timeView this job
3D configuratorJointing and filling plasterboardFinish fitted plasterboard until it is ready to paint, paper or tile: tape, fill coats, corners, sanding and primer.Moderate16 questions3 to 10 days, mostly because of drying timesView this job
3D configuratorFitting a washbasin or vanity unitA wall-hung or floor-standing vanity unit or a basin on its own, with tap, trap and mirror, on existing supply points.Moderate17 questionsHalf a day, plus 24 hours of drying timeView this job