Please note: this questionnaire has not yet been checked by a professional. Treat the outcome as an example only.
Preparing for the electrical inspection (AREI)
- Difficulty:
- Easy
- Duration:
- Half a day to a day of preparation, plus the visit
- Questions:
- 17
- 3D configurator:
- you see your job in 3D with every question
- Step-by-step plan:
- 16 steps

After a new installation, an extension or an upgrade, at the sale of a house and every 25 years, an accredited inspection body must inspect your electrical installation against the AREI. The inspector does the inspection itself, but you can do most of the preparation yourself.
You get the diagrams and documents ready, find out which circuit feeds what, label the consumer unit, test the residual current devices and go through the installation with an inspection body's checklist. That way you know beforehand what the inspector will remark on, and what you still need to have fixed.
Often combined with
Jobs that usually come just before or after this one.
3D configuratorPulling electrical circuitsNew circuits from the consumer unit to every socket, light point and appliance: chases, flush boxes, conduit and wire, and the diagrams for the inspection.Demanding15 questions2 to 5 days, depending on the number of pointsView this job
3D configuratorFitting or renewing a consumer unitA new single-phase consumer unit with a main residual current device, 30 mA devices and breakers, following the AREI and ready for inspection.Demanding19 questions1 day of preparation, half a day to a full day for the changeover, plus the inspectionView this job
Connecting sockets, switches and light pointsSafely connecting sockets, switches, two-way circuits, lamps and an outdoor lamp with a motion sensor to cables that are already in place.Moderate18 questionsHalf a day to a full dayView this job
3D configuratorInstalling LED lightingLED strips in an aluminium profile, recessed spots in the ceiling and a dimmer that matches them.Moderate22 questionsHalf a day to a full dayView this job