Please note: this questionnaire has not yet been checked by a professional. Treat the outcome as an example only.
Fitting a suspended ceiling
- Difficulty:
- Moderate
- Duration:
- 2 to 3 days for a room of 20 m²
- Questions:
- 15
- Step-by-step plan:
- 17 steps

A suspended ceiling hides an old, crooked or cracked ceiling, leaves room for cables and spots, and dampens sound if you put insulation in it. The grid of profiles hangs from the existing ceiling, and the plasterboard is screwed underneath.
We ask about your room, what you hang from and what you want in it, and work everything out: edge profiles, hangers and anchors for your ceiling, profiles, boards, screws and the tools. Then you get a step-by-step plan from the first line on the wall to the boards. With suspected asbestos, damp or a ceiling that sags, we tell you what has to happen first.
Often combined with
Jobs that usually come just before or after this one.
3D configuratorJointing and filling plasterboardFinish fitted plasterboard until it is ready to paint, paper or tile: tape, fill coats, corners, sanding and primer.Moderate16 questions3 to 10 days, mostly because of drying timesView this job
3D configuratorInstalling LED lightingLED strips in an aluminium profile, recessed spots in the ceiling and a dimmer that matches them.Moderate22 questionsHalf a day to a full dayView this job
3D configuratorPulling electrical circuitsNew circuits from the consumer unit to every socket, light point and appliance: chases, flush boxes, conduit and wire, and the diagrams for the inspection.Demanding15 questions2 to 5 days, depending on the number of pointsView this job
3D configuratorPainting walls and ceilingPainting the walls and ceiling of a room with water-based wall paint, with the right preparation and primer.Easy14 questions1 to 2 daysView this job
3D configuratorInsulating the attic floorInsulation on or in the floor of an unheated attic: the cheapest way to stop heat loss through the roof.Easy14 questions1 day to 1 weekendView this job